Ask Experts Questions for FREE Help !
Ask
    maria arias's Avatar
    maria arias Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Oct 28, 2012, 12:53 PM
    Dewalt generator recoil 6000,
    Can dewalt generator recoil 6000, be placed outside or can it run in the garage with door open. SAndy is coming and thought that to start generator after it passes. Also, have a delonghi portable electric heater and believe it uses 750 low and 1500 high is that 120V setting.

    Thank you
    maria arias
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Oct 28, 2012, 01:22 PM
    Outside... DO NOT run it in the garage... even with the door open. The inside door is NOT airtight and carbon monoxide would find its way back into the house.
    maria arias's Avatar
    maria arias Posts: 5, Reputation: 1
    New Member
    		  
    #3

    Oct 28, 2012, 01:26 PM
    Have a dewalt recoil generator model 6000, first time I have one. And wanted to know if it can be placed outside three feet away from house or have in the garage with door open. Also, I have a de longhi portable electric heater and believe that it uses 750 watts on low and 1500 watts on high can it run on 120v setting.

    Thank,
    Maria
    maria arias's Avatar
    maria arias Posts: 5, Reputation: 1
    New Member
    		  
    #4

    Oct 28, 2012, 01:41 PM
    Quote Originally Posted by smoothy View Post
    Outside....DO NOT run it in the garage...even with the door open. The inside door is NOT airtight and carbon monoxide would find its way back into the house.
    Thank you , I thought so because of the build up of carbon monoxide.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troubleshoot dewalt dw744 table saw [ 1 Answers ]

The motor for my Dewalt 744 Table saw sounds like it is missing or scrapping against something. I have cleaned and cleared all exposed areas near the blade, but still have the same symptoms. Is it possible the motor is going bad? It has been a good saw with lots of use.

Dewalt dw744 type 1 [ 3 Answers ]

The motor just blown! I know I can't buy complete motor assembly Which parts do I need?? Thanks a lot

How to set max RPM on dewalt drill [ 4 Answers ]

Hi there, Just wondering if anyone can explain in fairly simple terms how I can set the max RPM on a Dewalt 18V cordless drill (DC728). The drill has two speed setting (aptly named 1 & 2) and the chuck has up to 17 torque settings. I assume that some combination determines the max rpm but I...

DeWalt Nailer ( Air Escaping) [ 1 Answers ]

Hello guys I have a problem that needs a solution yesterday. I have a DeWalt nail gun that just today start acting weird. First it would shoot nails into the wood normally and at time it would fire and no nails would come out. Now this afternoon when I pull the trigger it won't even fire, every...

DeWalt 16" saw [ 2 Answers ]

I have a vintage 5 HP DeWalt 16" GE radial arm saw which was operating at 3 phase, 240/480 volt. Can I operate this saw at 1 phase, 240 volt. If so what has to be done to the saw. Thanks

View more questions Search