Ask Experts Questions for FREE Help !
Ask
    oline62's Avatar
    oline62 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    May 16, 2011, 05:02 PM
    Dewalt dw744 type 1
    The motor just blown!

    I know I can't buy complete motor assembly


    Which parts do I need??


    Thanks a lot
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    May 17, 2011, 07:04 AM
    We aren't mind readers here so without more info or pictures we have no idea of "which parts do i need???"
    oline62's Avatar
    oline62 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    May 17, 2011, 02:59 PM
    Which part do I need to replace a blown motor!
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #4

    May 17, 2011, 06:13 PM
    Oline 62. We have no idea what caused your motor to blow! There are many parts that could cause a blown motor. It could be an armature, windings, brush assembly, bearings, etc. In some cases, you can replace the bearings. If you need a new motor, it may be cheaper to wait till HD puts a saw on sale. Look on Craigslist, there are Dewalt tools on sale there.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Where can I find a motor for a DeWalt DW744 type 2 table saw [ 5 Answers ]

A friend gave me the above table saw which was not working. I disconnected the switch and hooked the motor directly to a power supply and the saw did not come on so I know it was not the switch. Rather than try to rebuild the motor, where can I find one and about how much can I expect to pay? ...

How to set max RPM on dewalt drill [ 4 Answers ]

Hi there, Just wondering if anyone can explain in fairly simple terms how I can set the max RPM on a Dewalt 18V cordless drill (DC728). The drill has two speed setting (aptly named 1 & 2) and the chuck has up to 17 torque settings. I assume that some combination determines the max rpm but I...

DeWalt Nailer ( Air Escaping) [ 1 Answers ]

Hello guys I have a problem that needs a solution yesterday. I have a DeWalt nail gun that just today start acting weird. First it would shoot nails into the wood normally and at time it would fire and no nails would come out. Now this afternoon when I pull the trigger it won't even fire, every...

DeWalt 16" saw [ 2 Answers ]

I have a vintage 5 HP DeWalt 16" GE radial arm saw which was operating at 3 phase, 240/480 volt. Can I operate this saw at 1 phase, 240 volt. If so what has to be done to the saw. Thanks

View more questions Search