Ask Experts Questions for FREE Help !
Ask
    drjones79's Avatar
    drjones79 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 26, 2012, 08:47 PM
    Replacing 2 wire white rodgers 1E30-910 thermostat
    I would like to replace this thermostat with a Hunter 44110. There are only 2 wires. One is connected to the terminal label 5 and the other is connected to the terminal labeled 4. I am not sure what I should label these wires to connect them to the Hunter thermostat.

    Here is a link to a website that has a picture of the thermostat.

    http://www.emersonclimate.com/Documents/White-Rodgers/instruction_sheets/0037-1759.pdf
    White Rodgers's Avatar
    White Rodgers Posts: 9, Reputation: 1
    New Member
    		  
    #2

    Nov 1, 2012, 02:43 PM
    Hi. This is Aaron Moratalla from White Rodgers. Terminal 5 is for the hot side of system transformer while 4 is for Heat relay. It also goes like R=5 and W=4.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

The orange wire is disconnected in my white-rodgers thermostat [ 0 Answers ]

I have an "Insider" heat pump with a White-Rodgers 2H/1C Type 1F59-15 thermostat. Today I noticed the a/c wasn't cooling. The temperature was 85 but the thermostat was sitting on 73. I took the cover off the thermostat, blew on it, tapped it a little, jiggled it a little and it came on. While...

I'm replacing a old white rodgers thermostat with a new hunter non programablme wirein [ 1 Answers ]

Please help

Replacing White-Rodgers 5 wire thermostat -- yellow connects to "A"? [ 2 Answers ]

I have a White-Rodgers 1F56W-444 ac/heat thermostat. I want to replace it with a Honeywell RTH110B thermostat. When I remove the old thermostat, the wires are connected from the wall to the thermostat as follows: R -> Rc G -> G W -> W B -> Y Y -> A

Replacing old White Rodgers Thermostat with Hunter 44260 [ 0 Answers ]

Where do the blue (E), and the pink (O) wires go? I think the rest go Y to Y/O; R to RH; W2 to W/B; and G to G, and I already read that brown (C) is not playing. Thank you.

Replacing White-Rodgers Thermostat with Honeywell Digital [ 7 Answers ]

I am replacing a 13 yr. old White-Rodgers Mechanical thermostat (couldn't find model # on website) with a Honeywell 5-1-1 Digital thermostat. The wiring was as follows for White-Rodgers: Green = G Yellow = Y White = W Red = RH jumpered to RC The Honeywell has terminals for

View more questions Search