How to hook goodman heat pump to honeywell thermostat

Check out some similar questions!

Bryant heat pump thermostat to honeywell [ 0 Answers ]

Bryant t-stat BBSHPO1 to RTH7600 Every mode works fine except outdoor unit in heat mode. T-stat has 6 wires.

Replacement of Carrier Heat Pump Thermostat with Honeywell TH6000 series thermostat. [ 4 Answers ]

I have a Carrier Series 50QT Electric heat pump that still uses the original non programmable thermostat. I am trying to replace it with Honeywell TH6000 series programmable thermostat. The wiring on the existing Thermostat as follows: O - White, I am thinking this is the Reversing Valve? Y...

How to wire a honeywell pro3000 TH3210D1004 to a goodman heat pump? [ 0 Answers ]

I am replacing a Janatrol T-state with a Honey well Pro 300 M/n Th3210D104 the wires from the old one were wired as such; Wx2= white, Y= Yellow, G= green, O= orange, R= red, B= , C= blue, E= tan, (there was a non used black wire). The new T-state has the following; E, Aux, Y, G, O, L, R, B, C. I...

Honeywell Thermostat - Heat Pump in a Condo? [ 21 Answers ]

I live in a 20 yr old condo with 2 Heating Systems that were described as "heat pumps" and recently decided to replace the thermostats from the 24 year old controls to Honeywell RTH7600 series touch screens. Ran into some issues as the wiring from my old thermostats didn't exactly line up with...

Installing a Honeywell thermostat on a Goodman heat pump [ 2 Answers ]

I am trying to install a Honeywell TH4210D thermostat to a Goodman PHKJ030-1 heat pump. Most wire colors match up but the Blue wire seems to be confusing. I'm not sure if it is a common wire on a Goodman. Also are there any jumper wires I need to install or remove?

View more questions Search

Check out some similar questions!

Add your answer here.