Ask Experts Questions for FREE Help !
Ask
    HOULSCTT7's Avatar
    HOULSCTT7 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 17, 2012, 09:06 AM
    York furnace blower won't stop running
    I have an older coleman /york furnace and after the heat has reached the tstat setting the burner goes off but the fan never stops. I have to manually turn off the power to the unit. The model # is P3VGD12N08001B
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Oct 17, 2012, 04:26 PM
    Is the fan setting on the thermostat on "auto", or "on". Should be on auto. If its on "on" the fan will run continuously. If that isn't the problem, you either have a bad fan control in the furnace(many different types) or a bad thermostat or t stat wiring.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace blower motor start and keeps running won't stop [ 12 Answers ]

I have a Carrier central furnace (furnace model 58GP050-BA). Now with the thermostat off the fan set to auto and the Gas pilot is on. When turn on the power switch to the furnace, the blower motor start and keeps running and won't stop. I have to turn off the power switch to the furnace to turn the...

Furnace blower don't stop running. [ 1 Answers ]

Gas turn on/off when it reaches its temperature but blower keeps running.

Day and Night Furnace Blower Won't Stop Running [ 8 Answers ]

I have a Day and Night Furnace that is about 15 years old. It works fine and is producing heat but the BLOWER seems to be stuck and runs constantly. Friends tell me that it could be the Blower Relay or a bad thermostat. Is the blower relay something I can change myself? There is a schematic on...

Heil dc90 furnace blower motor won't stop running [ 0 Answers ]

Heil dc90 furnace blower motor won't stop running removed the thermostat totally it still runs I replaced the chip board an the motor still just runs. There is no flame i.e. no heat.

Furnace blower motor will not stop running [ 3 Answers ]

Furnace blower motor will not stop running

View more questions Search