Ask Experts Questions for FREE Help !
Ask
    jrtelloh2o's Avatar
    jrtelloh2o Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 17, 2012, 11:09 AM
    Trouble-shooting
    I have a 2012 Honda Civic LX 1.8 bought at city auction 'as is' all the front of the car was crashed, all body and visual damaged parts were replaced, car takes off in first gear and as you gained speed goes in neutral, no wiring diaphgram or scan tool available.
    Thank you
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
     
    #2

    Oct 17, 2012, 11:25 AM
    Is the Check Engine Light on (bad VSS)? Did you check the transmission fluid level? Check all under dash and under hood fuses with a test light or multimeter.

    You really need to check it out with an advanced scan tool, including being able to read any pending codes.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Intercom trouble shooting [ 1 Answers ]

I installed an intercom in my house but when a try to use it it makes a verry loud noise like a feedback and I have no idea what's cousing that.

Heating and ac trouble shooting [ 1 Answers ]

My heater lights up then goes out after a second , has electric ignition and is working how do I know what to check next.

Rheem trouble shooting [ 1 Answers ]

The out door heat pump unit makes sounds like fan blade is scraping but it's not and a pounding noise like it is trying to shut off right back on

Trouble shooting my T.V. [ 1 Answers ]

I have an older model rear projection television, the video and sound both went out at the same time, anyone have an idea on what I need to change out

Trouble shooting [ 1 Answers ]

hi I have 1997 dodge ram 1500 4x4 my tail light went out and then the single light would . Cheeked out both. Bulbs on the right side, know the kicker is the hazzards work, the turnsignal works, if I step on the break.pleas help. Note I have replaced the turnsignal switch. still no luck.


View more questions Search