Ask Experts Questions for FREE Help !
Ask
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
    		  
    #1

    Oct 16, 2012, 02:10 PM
    GE Water Filter for Ice Maker
    GE Water filter GXRTDR twist and lock method. Simple inset your 1/4 inch water lines into the end of the filter twist and lock. I have 1/4 inch plastic line in the back of the fridge for the ice maker. I also have in another room 1/4 inch copper tubing with a saddle valve that comes off the water heater. Goes in the fridge pump and then goes out up the plastic tubing up into the ice maker



    Which is the best place to put the filter? See pictures
    Attached Images
       
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Oct 16, 2012, 03:17 PM
    Anywhere between the supply and the fridge that is accesible. Looks like right above the water heater would be a good place.
    pastor1189's Avatar
    pastor1189 Posts: 1,538, Reputation: 3
    Ultra Member
    		  
    #3

    Oct 16, 2012, 03:48 PM
    Thanks
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search


Check out some similar questions!

How can I replace the filter on a weather maker 8000 [ 1 Answers ]

How do I replace the filter on a weather maker 8000. I've removed the four screws on the lower cover plate, but it won't release. Does it matter if the unit is on or off?

Water Filter For The Ice Maker. [ 6 Answers ]

I have a 2005 Kenmore Refrigerator. Despite stories that the water filter is under the front grill does not apply for my model. I must install an inline water filter. In back of the bottom of the refrigerator The copper water supply line goes into the pump, from there is goes up a plastic...

Water filter to the ice maker line [ 1 Answers ]

I have a lot of copper tubing from the utility room to the refrigerater Ice maker. A lot of room to install a water filter to the ice maker. The thing is should I install the filter after the saddle valve, or before the saddle valve. I think it should be before?

Filter for kenmore double door ice maker [ 1 Answers ]

I need to find out if and where there is a filter for my kenmore double door refrigerator it is making hollow ice cubes and was told via your network of fellow handyman sources that my filter might need replacing, my question is where is it located and where can I find out if it has one?

Ice maker filter [ 2 Answers ]

I have a Kenmore side by side refrigerator. The ice maker filter is leaking and I want to know if I can bypass the filter. It has quik connects and the leak is occurring there. The two plastic lines are different sizes coming to the filter. Please advise.

View more questions Search