Ask Experts Questions for FREE Help !
Ask
    bikerchick's Avatar
    bikerchick Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 10, 2012, 07:22 AM
    Bryant furnace
    I have a bryant furnace and whenever it kicks on, it immediately shuts off?
    Grady White's Avatar
    Grady White Posts: 1,417, Reputation: 59
    Ultra Member
    		  
    #2

    Oct 10, 2012, 06:56 PM
    Does the main burner actually fire? If so, most likely the flame sensor needs to be cleaned.
    anagoree's Avatar
    anagoree Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Oct 13, 2012, 11:05 AM
    Check your filter. I had dirty filter which was preventing airflow and stopping furnace as soon as it starts. Also check for vent safety switch. You may need to reset it manually.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant furnace? [ 10 Answers ]

I have a bryant model 350mavo36080 series B input 80,000 output 74,000 The furnace runs all day when it is cold but the house never gets above 60 degrees The temperature in the plenum is 84 degrees so the furnace is only raising the temp by 24 degrees All 3 burners are working The air being...

Bryant furnace showing code 12-blower on after power up. Furnace won't start. Why? [ 0 Answers ]

Blower motor on all the time. No heat from furnace. Why?

My Bryant furnace blows the 3 amp fuse when the furnace is kicked on, but ac works fi [ 0 Answers ]

Switch furnace to emergency mode on my Bryant 90 furnace [ 2 Answers ]

I have run out of propane and we are in the middel of a blizzard. How can I switch my furnace to emergency mode? Thanks, Brett

Bryant furnace [ 2 Answers ]

On that furnace that only heats to 62.when the temperature reaches 62 the furnace shuts down but the fan remains on and it cycles again it ignites again but only till 62-63 degrees and cycles over again

View more questions Search