 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Payne heating and cooling outside unit
I've moved into this house with what looks like a fairly new unit outside. The air conditioning runs perfect but on the first cool night I tried turning on the heat and it does not kick on. I used the thermostat to switch to on and there is nothing but cold air blowing from the vents. The model number is PY1PNB090ABAA. I need to know what to do. Any help would be greatly appreciated. I do have some knowledge on units but none on a Payne system. Never dealt with a combined unit that is outside. Thank you.
|
||||
Check out some similar questions!
I have a company here installing a Payne Heating unit in a 3 ton system. Does it matter which side of the unit that the return air hole is cut in? I heard it should flow out the bottom or right side. Can you tell what is most efficient?
The outside condenser is PA10JA030-A with a Lonnex inside blower
I am trying to get some info on a Payne Heating and Cooling system. Our Home is about 1800 sq. ft. and what we have is a PH13 split system heat pump with R-410A. The fan coil unit is a PF4M. Is this a pretty good unit and how does it compare to a Trane unit of the same size?
It's a Payne Forced Air Furnace with Cooling Unit the product no. 585hjw024040abae, model no. 585hj054040, like I was asking in my previous question. It doesn't have a circuit board it has a contacter,step down transformer,relay,capasitor,run capasitor,spark ignition module,gas valve. I changed the...
My less than 3 year old Payne central heat/air unit will not put out heat. It is 59 degrees in our house today, and we are freezing. No money to hire a repairman. Was wondering if there is anything I could do to check it out. Thanks
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
