Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Heating and Cooling
[ 4 Answers ]
I found out why my thermostat is not working. We went through and found out my fan on my furnace is not working. They told me that I proably blown a fuse. I have an american standard furnace - model number twv025b140a1 - serial number is g49394469 - motor hp is 1/4. Can you tell me where the...
Payne A/C motor not running/cooling
[ 11 Answers ]
I have a Payne unit that was installed about 4 and a half to 5 years ago. It/s a Model # PH10JA048-B, with a 1/4 hp GE motor (#5KCP39FGS0715). The outside motor that operates the a/c unit is not running. I'm not sure if the unit is still under warranty, and don't want an excessive service bill....
Payne forced air with cooling unit
[ 4 Answers ]
It's a Payne Forced Air Furnace with Cooling Unit the product no. 585hjw024040abae, model no. 585hj054040, like I was asking in my previous question. It doesn't have a circuit board it has a contacter,step down transformer,relay,capasitor,run capasitor,spark ignition module,gas valve. I changed the...
Heating - Payne unit
[ 2 Answers ]
My less than 3 year old Payne central heat/air unit will not put out heat. It is 59 degrees in our house today, and we are freezing. No money to hire a repairman. Was wondering if there is anything I could do to check it out. Thanks
Heating and cooling
[ 3 Answers ]
My furnace come on and then starts to blow out cold air View more questions Search
|