Ask Experts Questions for FREE Help !
Ask
    ejs82's Avatar
    ejs82 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 6, 2012, 10:45 AM
    Gas furnace does nothing
    We have a Borg-Warner furnace,and tried to start it yesterday and nothing happened. Pilot Light was out so re-lit, still nothing, replaced the thermocouple and nothing. Blower isn't running, flame not igniting, nothing. Just the pilot light is lit is all. Any advice is appreciated.
    ejs82's Avatar
    ejs82 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Oct 6, 2012, 11:04 AM
    Also, forgot to mention, even when we turn the thermostat to "fan on".. still nothing.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trane gas furnace only one gas burner ignites temporarily then shuts off [ 1 Answers ]

Have a Trane XL80 furnace. We switch the furnace on but after the initial ignition it turns off. And then repeats about a minute later, and then again. Only one and sometimes three of the burners are temporarily igniting. We have removed and cleaned the heat sensor and replaced the igniter...

I have a goodman GDT090-4A gas furnace. The igniter will ignite the gas and the gas w [ 2 Answers ]

The igniter will ignite the gas, and the gas will run for a second or a few seconds and will then cut off. It will continue to cycle like this until it finally will stay on but at times will take forever.

My carrier gas furnace would not light up the pilot burner although sparks and gas is [ 0 Answers ]

My carrier gas furnace would not light up the pilot burner although sparks and gas is present. I've tried to light up the pilot burner with a gas grill light and it works.

I have a Frigidaire gas furnace which fires up for a couple of seconds then gas shuts [ 1 Answers ]

My Frigidaire gas furnace has 3 burners that ignite for a couple of seconds then shuts off. The electric ignition and fan works fine, it's just the burners that turns off after a few seconds. If I try turning the furnace on and off a few times it sometimes fires up and stays on. I have tried...

View more questions Search