Ask Experts Questions for FREE Help !
Ask
    GlenWash's Avatar
    GlenWash Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 6, 2012, 08:08 AM
    My furnace model GMP 125-4 WILL NOT TURN ON THIS MORNING.
    Checked all electrical parts, has electricity but furnace is dead!
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Oct 6, 2012, 09:20 AM
    Bad thermostat, control board, broken thermostat wires, Does this have a standing pilot or a hot surface ignitor? Are they working?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman model gmp 125-4 Rev B [ 1 Answers ]

I have a goodman 125-4 rev b furnace and the gas valve will not open. I wiggled the wire to what appears to be a fuse in the red line coming into the gas valve and it got gas for about a half second. What is the component in the gas valve wire?

I have a janitrol gmp 125-4 gas valve opening too soon [ 0 Answers ]

I have a janitrol gmp 125-4. when it cycles the first time the gas valve is opening before the igniter glows. On the @nd try the igniter glows nice & red before the gas valve opens & fires like it should

I have a janitrol gmp 125-4 gas valve opening too soon [ 0 Answers ]

I have a janitrol gmp 125-4. when it cycles the first time the gas valve is opening before the igniter glows. On the @nd try the igniter glows nice & red before the gas valve opens & fires like it should

Goodman GMP 125-4 tries to start [ 2 Answers ]

My 1995 Goodman Gas furnace with hot surface ignition tries to start when the thermostat calls for heat. The Draft Inducer Motor powers up for less than a second than quits. Circuit Board gives steady LED before and after resetting the furnace. Draft Inducer spins freely and Draft Inducer Motor was...

Bryant furnace model 373lav won't turn on [ 1 Answers ]

Hello, My Bryant furnace model 373lav won't turn-on. At first, I can see the one of the stick in front of the burner glowed red followed with the hissing sound of the gas turned on, but nothing happened after that-the furnace did this 3 times and the burner never came on. * Filter is clean...

View more questions Search