 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Diy thermostats honeywell
I have changed the batteries for my thermostat, and now the time is flashing, since it has lost its settings, I followed the directions to reset the time but it does not respond.My thermostat is RTH2310 Mod number rth2310B9090 My email is [email protected] Thank you
|
||||
|
||||
|
I assume that you have the manual with the instructions. Take batteries out and turn off power for one minute, then put batteries back in, plug on t-stat to sub-base and turn power back on. This will reset it and you should be able to program it. If not, you may have a bad one. Always turn off power to furnace before changing batteries and plug t-stat back in before turning power back on. This is because when you plug it in to a live system you hit one or more pins in a certain order that will confuse it. Here is the manual: https://dl.dropbox.com/u/8010163/Hon...2310_TStat.pdf
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Rth221b1000 thermostat. Apparently showing temp in celsius. How do I get to Fahrenheit?
My old honywell thermostat model #T8411R 1028 (2) appears to have died. I purchased a newhoneywell thermostat model #RTH7500 series. It was working until I changed the temperature and it stopped working. It keeps making clicking sounds but is not coming back on. I am now waiting for an...
How to hook up the colored wires to a honeywell rth7400 thermostat? It is for a trane heat pump.
In 1994, new constrction, a Honeywell Trol A Temp Zone Control System was installed with7 day programble Honeywell model T8600 Chronotherm III thermostats. The master thermostat on the lower level was recently replaced with a Honeywell Chronotherm IV model T8624D 2012 and now I need to replace...
Hi I lost my manual about my thermostat and was wondering if the Filter on meant I needed to change my filter? Thanks
View more questions Search
|
