Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Oil fired heater instructions
[ 1 Answers ]
I have a Monogram Ind. mod 1019 heater. Looks new, can't see any sign of use. Where can I get parts and instructions for safe use? Where could I sell it, and what do you think it might be worth?
Csa certification Beach oil fired warm air furnace
[ 1 Answers ]
I am attempting to provide a customer with a TSSA inspection (Ontario) for their Beach oil fired furnace, this is a standard "trailer" furnace, compact in size intended to be installed in an alcove or closet. There is little or no info posted on the unit, whether removed or painted over, it has a...
Furnace oil fired
[ 7 Answers ]
I have a beckett oil fired furnace, that has an intermittent problem . If I turn it on most of the time it will come on an work perfect however if I set the thermostat to say 70 the furnace will recycle on and of as it should and then it may pop the reset if I reset it now it may start up and work...
Adding a zone to oil fired hot air furnace
[ 0 Answers ]
I would like to add a zone a oil fired forceh hot air
Lennox oil fired furnace
[ 1 Answers ]
I have a old lennox oil fired furnace. The transformer burnt the wires off and the unit is so old I am unable to find the x-former for it. The contacts go from side to side. All the replacement x-formers have contacts that go up and down. Does anybody know of any old Lennox dealers or service... View more questions Search
|