Ask Experts Questions for FREE Help !
Ask
    kellystuart's Avatar
    kellystuart Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 1, 2012, 02:12 AM
    Robert shaw 9420
    My Robert Shaw 9420 just started turning off by itself. I've had it three years I believe. It came on twice during the night, and the screen is blank again now. What's the warranty? Do I need to replace this thermostat?

Check out some similar questions!

Old Robert Shaw ac thermostat with W,Y,G,R. and A connections [ 0 Answers ]

What is the A connection for on my themostat? I have W,G,Y,R and A. White wire is on W, Yellow wire is on Y, Green wire is on G, Red wire is on A, and Orange wire is on R. I want to install a programmable thermostat.

Robert shaw reset [ 6 Answers ]

I had a flammable gas present code flashing, I unhooked some wires now I have a miss wiring code, how do I reset?

Cm260 robert shaw? [ 0 Answers ]

I am changing a robert shaw cm260 t-stat to a honeywell rth2300. The robt shaw had a red and yellow wire hooked to the A contact. There is no A on the honeywell, where do you hook them up. Or could you say what those wires do? The whole connection was blue wire to B, white to O, green to G, red and...

Robert Shaw 9420 cannot set temp for the heater [ 1 Answers ]

Just moved into a new house and it has the Robert Shaw 9420 system in place. During the warm month the AC worked perfect but since it has started turning cold(low 40's) at night I have been unable to set the temp for the heater. No matter what temp I set it the heater keeps running until I manually...

Robert Shaw model #9420 flashing [ 1 Answers ]

Cannot get thermostat to do anything except turn on ?off the fan. Display is flashing. Pressing the light button does not even turn on light

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.