Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do I insert a y pipe into a fixed horizontal drain pipe?
[ 18 Answers ]
I have cut the concrete to the existing drain pipe but do not understand how I can insert a new y pipe into it since the existing pipe is not moveable in either direction and you cannot use rubber unions under the concrete.
How do I stop a loud vibration in a vertical plumbing drain pipe?
[ 3 Answers ]
I have a septic system and just installed a sump type pump to pump laundry water up from the basement into the septic system, but every time it turns on the pipe vibrates very loud! I installed a check valve in the vertical pipe as well. Any thoughts to stop the vibration?
Ground Water coming up around basement drain pipe
[ 4 Answers ]
Finally located source of water in my basement. Removed shower stall base in basement bathroom. It appears that ground water is coming in around the shower drain pipe (PVC). The area around the pipe is about four inches and about 4 inches deep as well. In addition right outside the bathroom is a...
How to tie into vertical sewer pipe for new drain
[ 4 Answers ]
We have a weekend house in the country with a septic system. It has a basement and in the utility room, a water softener and heat pump/furnace. The drain for the heat pump and water softener go into the floor drain now. The problem is the floor drain is a French drain discharging above ground...
Ok to tie a wet bar drain into a drain pipe coming from 1st floor.
[ 6 Answers ]
I'm finishing my basement in a newer house and want to add a wet bar. There is a 2" PVC drain pipe coming from the 1st floor that is for the washing machine drain. It has a clean out plug on it also. Can I just add a wye or Santee for the bar drain and do I need an Air Admittance Valve for venting.... View more questions Search
|