Ask Experts Questions for FREE Help !
Ask
    dapper43's Avatar
    dapper43 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 28, 2012, 04:49 PM
    Free ans to wiring a thermostat to furnace
    Robert shaw termostat does not have same terminal identification as rheem furnace terminal strip . Want to know which wire goes to which terminal
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Sep 28, 2012, 04:52 PM
    We are not mind readers.

    What terminals are on the thermostat.

    AND


    What terminals are on the furnace.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need help wiring my thermostat to furnace. [ 0 Answers ]

I removed the 4 wires from my thermostat and the 2 wires from my A/C unit from the control board ICM 271 and seem to be having trouble getting them back to the proper places. Control board has C-Y-GC-GH-R-W and the thermostat has RH-RC-W-Y-G and the 2 wires coming in from the A/C unit are both...

Wiring a furnace thermostat to manually operate the furnace fan [ 2 Answers ]

I have two wires connected to my furnace thermostat. There is a place labeled G on the thermostat. Can I simply run a wire from the G terminal on my thermostat to the terminal labeled G on my furnace fan relay to operate the fan separately?

Goodman furnace guso50-2 thermostat wiring instructions for 2 wire thermostat [ 2 Answers ]

Looking to hook up a 2 wire heat only thermostat as the door with the weiring diagram is missing it's a goodman guso50-2?

Add on coal/wood furnace thermostat wiring for 2 zone house with oil furnace [ 1 Answers ]

I purchased a Harman wood / coal furnace model SF-2500 (forced hot air system) and am tying into my existing forced hot air oil furnace 2 zone system and do not know how to tie into the existing thermostats and zones. I wish to still use the 2 separate zones for the bedrooms and the main body of...

Wiring thermostat to furnace [ 17 Answers ]

I am putting in a new furnace and thermostat. The connections on the furnace are C G R W1 W2. The connections for the thermostat are B O Y G W RC RH. There is a jumper wire on RC and RH. The thermostat instructions say to run the hot wire to RH and the neutral wires to W and G. I am using 3...

View more questions Search