 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a Trane XE80 gas furnace. The purge motor and burner go on, but main motor won't run. LED flashing light flashes continuously when burner is on however, when the burner shuts off, the LED light flashes 4 times at an interval. I tried to look for a reset button on the main blower motor but...
I have replaced the blower motor on my XE80 believing that the noise that was coming from it was due to failed bearings. I installed the new motor and the noise is less but still there. Is it possible that the fan itself is unbalanced or faulty in some way as to cause this noise? There are no...
HI, We are having trouble with our old trane furnace.It has worked fine up until last year when it got really cold and a kind of drainage pipe froze but it was easily fixed.This year poses a different problem.Our blower(fan)is sueaking really bad.So bad in fact that we were afraid to leave it on...
Hi *, After a power surge in FL AC (Trane xe80 heat with gas/cool elec.) wouldn't start. I changed a couple of circuit breakers that tripped, one outside to the AC unit outside, one inside to the furnace. Power company came over and checked power in the outside unit. It has power and can kick-off...
My thermostat calls for heat, but the blower just comes on and blows air. No heat until I go down and manually restart the furnace. Any suggestions?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
