Ask Experts Questions for FREE Help !
Ask
    james toye's Avatar
    james toye Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 25, 2012, 05:52 AM
    Poulan pro blower
    90yr lady grandson accidentally put gas in without mixing,will not start
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
    		  
    #2

    Sep 25, 2012, 05:55 AM
    Big question was it run like that? If it was its liky ruined... if it wasn't it can be drained out and refiled with the proper oil/gas mix.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Sep 25, 2012, 07:34 AM
    If it was run without an oil mix, for any decent period, it will seize the piston or score the cylinder and you will get no compression. If that's the case, time for a new one.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Poulan Pro Lawn Mower [ 2 Answers ]

My push lawn mower will start, but quickly sputters out. I removed the air filter to see if this was the culprit, but the results were the same. What next?

Poulan Pro Blower won't turn over, only back fires with starter fluid... [ 5 Answers ]

I have a Poulan Pro Blower Model #: PBV200. It wouldn't turn over, so tested for spark, seems to have a powerful spark, then tested fuel filter and air filter, seemed clean. Being all it takes for these to run is air, fuel and fire. I tested the gas and gas lines, even replaced with fresh fuel,...

Poulan Pro belt change [ 5 Answers ]

My Poulan Pro 42" 17hp automatic riding mower has thrown the belt that is located directly beneath the floorpan. What is the best way to get to it and replace it?

Poulan Pro blower sm400 starter rope sticks [ 0 Answers ]

The starter rope on my Poulan Pro SM400 sticks when I pull it out. What can be done? Thanks for any help!!

Poulan Pro gas leaf blower/vac [ 1 Answers ]

I am having trouble keeping the thing running. I noticed that there seems to be a filter on the gas line in the tank. Could it be dirty and if it is then how or what do I clean it with. Would it be better to just replace the filter?

View more questions Search