Ask Experts Questions for FREE Help !
Ask
    sanguinefari's Avatar
    sanguinefari Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 21, 2012, 10:42 AM
    Capacitance question need help
    Four capacitor each of 2microfarad are connected in such a way that total capacitance is also 2 micro farad show what combination gives this value?
    Illustrate the diagram too.
    sanguinefari's Avatar
    sanguinefari Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Sep 21, 2012, 10:46 AM
    Capacitance question help please ASAP
    The parallel plates of an air filled capacitor with area of area 1.1 x 10^8 m^2 . What must be the width of the plate be if the Capacitance is 1 Farad?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Please help fast physics capacitance [ 0 Answers ]

A parallel-plate capacitor has a plate area of 0.2m2 and a plate separation of 0.1mm. To Obtain an electric field of 2.0 × 106 V/m between the plates, the magnitude of the charge on Each plate should be: ANS : 7.1 × 10−6 C I don't get why, I worked it a 100 time it gave me 3.5 × 10−6 C! HELP!

Electrostatics and Capacitance [ 20 Answers ]

Am I correct to think that the higher the charge between two plates in a parallel plate capacitor the higher the voltage difference? Is there an equation relating these difference in charge between the plants and the voltage difference between the plates?

Capacitance [ 2 Answers ]

5.a) Two capacitors , C1 = 3 F and C2=6 F , are connected in series and charged by connecting a battery of voltage V=10V in series with them. They are then disconnected from the battery, and the loose wires are connected again. What is the final charge on them. b) Repeat problem 5(a) , and after...

Capacitance [ 1 Answers ]

Here I 've a problem related to capacitance and its energy. The question goes like this :- A parallel plate capacitor having plate area 400 cm square. And separation between the plates 1 mm is connected to a power supply of 100 V. A dielectric slab of thickness .5 mm and dielectric constant 5 is...

View more questions Search