 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Please help fast physics capacitance
A parallel-plate capacitor has a plate area of 0.2m2 and a plate separation of 0.1mm. To
Obtain an electric field of 2.0 × 106 V/m between the plates, the magnitude of the charge on Each plate should be: ANS : 7.1 × 10−6 C I don't get why, I worked it a 100 time it gave me 3.5 × 10−6 C! HELP! |
||||
Check out some similar questions!
Am I correct to think that the higher the charge between two plates in a parallel plate capacitor the higher the voltage difference? Is there an equation relating these difference in charge between the plants and the voltage difference between the plates?
5.a) Two capacitors , C1 = 3 F and C2=6 F , are connected in series and charged by connecting a battery of voltage V=10V in series with them. They are then disconnected from the battery, and the loose wires are connected again. What is the final charge on them. b) Repeat problem 5(a) , and after...
how to calculate value of capacitance needed for power factor improvement?
Im trying to test barrel capacitors with this meter but I'm unsure of how with the CAP setting, I have searched this site and found a similar question and folks said go to sears.com or www.3sears.com or whatever the parts.sears address was, I searched and searched fruitless. What Im trying to do...
Here I 've a problem related to capacitance and its energy. The question goes like this :- A parallel plate capacitor having plate area 400 cm square. And separation between the plates 1 mm is connected to a power supply of 100 V. A dielectric slab of thickness .5 mm and dielectric constant 5 is...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
