Ask Experts Questions for FREE Help !
Ask
    inwyoming's Avatar
    inwyoming Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 18, 2012, 04:52 PM
    Goodman furnace
    My Goodman furnace is almost two years old. It worked fine last season. I turned the thermostat up last week, and nothing happened. I checked to make sure there was power and the cover was on propertly. I changed the filter and checked the air intake, but still nothing.
    When the unit is turned on, the green light flashes repeatedly as if everything is fine. Any suggestions?
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Sep 19, 2012, 08:09 AM
    Green light flashes///////on what? The tstat? Or circuit board in the furnace?
    inwyoming's Avatar
    inwyoming Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Sep 19, 2012, 08:35 AM
    This is my daughter's furnace I helped arrange to have installed almost two years ago. I put the model number in a search and discovered it is actually a York furnace, Model No. TG9S060B12MP11A.

    Installer was looking at both options and recommended the York. You may not want to continue answering, but the green light is on the furnace. She is in another city. I think she is seeing it in a view window.

    I downloaded the tech specs and the manual and will send those to her to review. Appears there may be two locations at which you have to be sure the gas is on. We will go through the start-up procedures and see what happens.

    Thank you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman Furnace [ 2 Answers ]

I've purchased a home where the furnace was to be replaced NEW with a Goodman Furnace. We've been given the model # GMPE 100 S4A from the seller. Anyone know if this is an actual Goodman Model - the colour is beige, not black.

Goodman furnace with 3 blinking lights and furnace has flame roll back [ 7 Answers ]

I have a GMNT-080-4B Some times I get a 3 blink light issue and then when it starts it has a flame roll back. Also I have to change the ignitor every year. Any help would be great

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...

Goodman furnace [ 1 Answers ]

Have a Goodman Furnace that continues to fail to start up. After some diagnosis on my part I find the incoming vent PVC pipe is clogged with frost. I believe the incoming air is drawing in moisture from the hot air exiting the furnace and then building up frost just inside the pipe opening. I...

Goodman Furnace [ 1 Answers ]

My furnace is pulsating, gas valve is clicking on and off rappidaly, I shut it off for a short time then it will work for a few hours then start acting up again installed new air pressure switch no change,do you think I should replace the flame sensor.

View more questions Search