Anco heat pump relays

do57 Posts: 1, Reputation: 1

New Member

Sep 19, 2012, 07:55 AM

Anco heat pump relays

I have installed a new furnace,want to put 3 zones in house with 3pumps and 3 thermostats. Not quite sure how to wire it. Can you show me or tell me where to find the info?

Check out some similar questions!

I have a 4 ton rued heat pump with auxiliary gas heat pump quits working [ 1 Answers ]

I have a 4 ton ruud heat pump with gas pack the heat pump quits when it gets 39F outside and furnice kicks in but does not ignite and I smell no gas what could it be

Can I replace a heat/cooling control board with relays? [ 0 Answers ]

Recently had a HVAC Tech replace the elements and all sequencers and limits for the heating side of my Nordyne E1E-015A HA. When he finished nothing would work, so he called another Tech in to check things out. He ended up hooking up a relay from the T-stat wires on the top of the control box so...

Two relays with hot water heat [ 0 Answers ]

I have a gas fired boiler system and I am trying to install a new programmable thermostat on my main floor. I have relay 2 switches to control the two floors along with their own wiring. For some reason the relay swithces will not close and my heat will not shuf off though it seems to work with a...

Installed a honeywell pro6000 stat on a carrier heat pump, cooling mode is heat pump [ 2 Answers ]

Installed a honeywell pro6000 stat on a carrier heat pump, cooling mode is heat pump

Central heat problems relays [ 1 Answers ]

Whan I turn on thermostat I get nothing no heat no fan I have central a/c and heat some one told me it's a relay if so where would it be located

View more questions Search

Check out some similar questions!

Add your answer here.