 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Two relays with hot water heat
I have a gas fired boiler system and I am trying to install a new programmable thermostat on my main floor. I have relay 2 switches to control the two floors along with their own wiring. For some reason the relay swithces will not close and my heat will not shuf off though it seems to work with a manual mercury thermostat. By the what it is a 3 wire heat only.
|
||||
Check out some similar questions!
I live in an apartment that was recently gut renovated and I have a new hot water heater as well. The issue is that I have to turn on the heat in order to get hot water in the shower, kitchen and bathroom sinks, otherwise the water is cold. When the heat is on, the water is very hot, but...
We never heard this noise before now. How do I fix this? It is driving me BONKERS. I purged the system at all radiators and get nothing but water out. I did this with and without the pump running.
I have a 1120 square foot ranch. I have a long haired cat and can't stand the dust and cat hair that is constantly blowing around. What would it cost to convert my heating system from forced hot air to forced hot water heat.
Whan I turn on thermostat I get nothing no heat no fan I have central a/c and heat some one told me it's a relay if so where would it be located
We have a older hot water heating system it was working fine but now there is no circulation. I heard this can be like a vapour lock, if this is it how can we fix this? Do we have to drain the system? Is there a different way? How do you bleed the system? Thanks for taking the time to help.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
