Ask Experts Questions for FREE Help !
Ask
    billyjackson's Avatar
    billyjackson Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 3, 2012, 07:49 AM
    I have a bryant home perfect plus system, model fc48nf048, and I have an e2 error cev
    I have a bryant home perfect plus system, model fc48nf048, and I have an e2 error flashing. Bryant.com is of no use to me. I have been in many, many forums, Google leads, and am unfortunate in finding any idea of help on this subject. Any ideas?
    Terrycloth's Avatar
    Terrycloth Posts: 16, Reputation: 1
    New Member
    		  
    #2

    Sep 4, 2012, 02:23 PM
    Do you not have a diagram on the inside of the panel ? That will tell you what the fashing controls or where the error is occurring
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant furnace model 376cav, error code 24. [ 7 Answers ]

I am getting error code 24 on my bryant furnace. Could someone please help me by letting me know what the code is, and how to fix it? I was trying to install a new thermostat and might have got wires crossed. Thanks

Bryant model 350m error code 21? [ 0 Answers ]

I've had an intermittent problem with my Bryant 350MAV for a couple of years. The motor will kick on but then it will just run. After a while I realize that it's getting cold in the house, the motor s running but I never heard the whoosh of the gas igniting. I pull the panel and see that it's...

Bryant furnace model 310AAV blowing cold air, error code #13 [ 1 Answers ]

I have a Bryant furnace model 310AAV that is displaying the #13 error code. The furnace is blowing cold air... I've flipped the power and gas off a couple times and now I'm letting it run. Code #13 says after 3 hours the control will auto reset... does this mean if I leave it running for 3...

How to fix a code 12 error on a bryant heating system [ 0 Answers ]

It's a bryant model #315aav048090 series b system the burners come on foe about a min. but than shut off as blower kicks in

Bryant model 2s to hunter model 44860 [ 1 Answers ]

I am trying to replace a bryant tstat with a hunter programmable tstat. The bryant is a single-speed heat pump with FK4 fan coil and special 3-stage electric heat (model 2s tstat) the hunter model is 44860 Assuming that it is a compatible tstat, is it easy to install? Thanks, ed

View more questions Search