Ask Experts Questions for FREE Help !
Ask
    cameron246's Avatar
    cameron246 Posts: 2, Reputation: 1
    New Member
     
    #1

    Aug 31, 2012, 12:25 PM
    Kenmore dishwasher
    How's everyone doing. Good I hope. My wife and I bought a Kenmore dishwasher from Sears about two years ago. Since then we've had the same issue happen three times. The first time it was under warranty so it was taken care of. But it's happened again and I need some help. The dishwasher is plugged in and has full power, but it will not run. None of the buttons are doing anything, it basically looks like it has no power going to it. We tried oppening the front cover and messing with the wires, and it actually worked the thing lite up and was working. Two hrs later it died again. If anyone can help it would be greatly appreciated.
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Aug 31, 2012, 01:33 PM
    When it was under warranty, what did they repair or replace? Sounds like control panel is not working. Does this have touch buttons or a turn dial?
    cameron246's Avatar
    cameron246 Posts: 2, Reputation: 1
    New Member
     
    #3

    Aug 31, 2012, 07:31 PM
    Quote Originally Posted by ma0641 View Post
    When it was under warranty, what did they repair or replace? Sounds like control panel is not working. Does this have touch buttons or a turn dial?
    It has touch buttons, and yes they did replace something in the control panel when it was under warranty.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore dishwasher [ 0 Answers ]

I have a Kenmore Ultra Wash Quiet Guard which is 4 year old. It's model no. is 665.17039402. When I press normal wash, the cycle goes as far as to Washing... Sensing, then stops. The pan is filled with water and is not draining until I press cancel, then it drains out. What should I do? Paula

Kenmore dishwasher [ 0 Answers ]

My kenmore dishwasher is not running on the clean cycle. It drains and heats fine however, it will not run on the cycle to clean. What could the problem be?

Kenmore dishwasher [ 2 Answers ]

My dishwasher won't start any cycles. I have noticed that the start button which usually lights up a steady green light once the cycle is set to begin is flashing green 7 times and does not begin to start the cycle. Is there any way possible to reset the control panel? :confused:

Kenmore dishwasher [ 0 Answers ]

How do I get my Kenmore dishwasher "control Lock" button off?

Kenmore dishwasher [ 1 Answers ]

My kenmore model3384545 is not starting when pressing start going right to cancel/drain?


View more questions Search