 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore Stack has no water entering washer tank...
I have an old stack washer/dryer (kenmore) that has no water entering the tank, despite water flowing through supply lines. Seems to work fine when manually filling tank. I am not where the washer/dryer is so won't have model number until tomorrow. Just trying to get an idea of how to proceed, what to look for in sequence, etc... Probably no need to mention it, but I am new to this site.
Thanks for any responses... Mel |
||||
|
||||
|
There are only two parts that will cause this problem: the water valves and the water level switch. Most likely it's the water valves. Check the screens and see if they are clogged, then check the solenoids for continuity (500-3000 ohms). The diaphragms could be stopped up with scales, too. Here are some manuals: https://dl.dropbox.com/u/8010163/Und...c%20washer.pdf
https://dl.dropbox.com/u/8010163/How...e%20Manual.pdf https://dl.dropbox.com/u/8010163/Whi...%20Washers.zip https://dl.dropbox.com/u/8010163/Ken...ng_Machine.pdf https://dl.dropbox.com/u/8010163/Ken...sher_Elite.pdf |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Kenmore stack washer dryer... model #417 987 02891 I have two symptoms... The dryer:... It squeaks when it turns and when it stops it stops VERY abruptly just as if it's a wheel turning with the brakes on... The washer: makes a loud rhythmic chugging noise like the motor is...
My son has a Kenmore stack washer/dryer that makes a noise that sounds something like a gear when washing only. Could this be a transmission problem? Jay
My oil furnace delivers water at a controlled 70 degrees. After running for 2 hours or more warm water migtates up to the cold water tank and begins to heat it. What is the cause and how can it be rectified please?
The cold tank was overflowing. I changed the diaphragm valve, but the tank still overflowed. I then noticed that water was entering the cold water tank from the hot tank feed! The water in the cold tank was tepid and not cold! Time to call in the plumber! The plumber noticed that even when...
View more questions Search
|
