Ask Experts Questions for FREE Help !
Ask
    esulli60's Avatar
    esulli60 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 25, 2012, 09:29 AM
    Stx38
    Is the nuetral switch on the transmission suppose to be open or closed position (electricly) when in gear vs neutral position Thanks in advance
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 26, 2012, 05:27 PM
    Hi,
    Generally closed.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John deere stx38 won't start [ 1 Answers ]

I put a new tractor drive belt on the mower, now it won't start. Checked the safety switch, OK, checked the solenod, OK. Found a wire clip with two wires on it on top of the transaxle not connected to anything, one purple and the other gray, tested the one wire and get voltage when the key is...

John Deere STX38 [ 4 Answers ]

I am changing the drive belt and having trouble getting the belt around the tension pulley. Is there a trick for putting on the belt? It is a John Deere STX38 (Yellow Mower Deck)

Installing belt on JD STX38 hydro [ 3 Answers ]

Can anyone tell me how to install the mower belt on a John Deere STX-38 hydro? Diagram? Picture? I would appreciate it.

John deere stx38 [ 1 Answers ]

I have a john deere stx38 , has difficulty climbing inclines or hills, runs fine on level ground. Have replaced engine mount bolts Have replaced drive belt Have checked fluid level in transmission Note this is a hydro drive Question: is there another adjustment I can make or is there...

View more questions Search