 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Carrier weathermaker 8000 troubleshooting
My carrier 8000 weathermaker will not operate in heat or cool mode. Power is going the outlet it is plugged into. I get no code lights. Have reset the house breakers and left the unit unplugged for ten minutes, then tried it again, no luck. Replaced my heat and cool control on there wall, no effect. I changed the old control because the fuse in it was blown, installed new fuse but still no worky.
|
||||
Check out some similar questions!
Getting a 12 error code. The blower starts but no ignition. I checked the ignitor seems OK and the flame sensor I lightly sanded. Still same result. Any ideas?
Weathermaker 8000 control problem with blower - code #33 The IDM runs, the HSI glows, the GV operates and the burners fire up but then no blower start and eventually the furnace shuts down on overtemp. I have run the test sequence and everything operates, even the blower at all speeds. I...
How do I install the inducer motor assembly in weathermaker 8000 model 58wav gas furnace
Says aux heat is on but blower doesn't come on.Why?
I have a carrier weathermaker 8000 gas furance... when the thermastat calles for heat the furance turns on it willgo for 3 for 4 min... then the flame stops and the blower runs for the 128 seconds... this is all normal... but the thermastat is still calling for heat and the furance kick on again...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
