Ask Experts Questions for FREE Help !
Ask
    rtramte's Avatar
    rtramte Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 21, 2012, 11:08 AM
    M112490 belt too loose.
    Is there a tension adjuster pulley?
    I ordered a M112490 CPT belt and it is too loose>
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 25, 2012, 10:54 AM
    Hi,
    You tacked your question on to a three year old post. That made it invisible to most. Now if you will begin with some model info, perhaps you can get an answer.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Loose drive belt [ 2 Answers ]

I just repaired the engine on my Yard Machine. I re-installed it using the same mounting holes and now the transmission drive belt is way too loose and I can't figure it out.

Replaced the belt on my dryer, but the new belt is loose. [ 1 Answers ]

We replaced the belt because the dryer is squeaking. The old belt is longer than the new belt. And the old belt did still turn the drum. Why is the new belt so loose? We are putting around the motor pulley and the guide pulley. Any suggestions?

Troy Built Loose Drive Belt [ 3 Answers ]

I just started using my Troy Built Model 830 5.5 hp self-propelled mower and it works fine without a load; however, the belt is too loose to cut grass. I don't see any adjustment for taking the slack out of the belt. I bought this at Home Depot about two years ago, but just tried to use it when my...

Mower deck belt loose [ 3 Answers ]

Please help I have JD 60" med mount mower deck I can't keep the drive belt on I place new belt on and same problem any way to adjust the belt?

View more questions Search