Ask Experts Questions for FREE Help !
Ask
    thejohnsonsrule's Avatar
    thejohnsonsrule Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 15, 2010, 12:05 PM
    Replaced the belt on my dryer, but the new belt is loose.
    We replaced the belt because the dryer is squeaking. The old belt is longer than the new belt. And the old belt did still turn the drum. Why is the new belt so loose? We are putting around the motor pulley and the guide pulley. Any suggestions?
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Aug 15, 2010, 12:51 PM

    Wrong belt.

    Is the idler pulley putting tension on the belt?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I replaced mowing deck belt on mtd 42 in. Deck with correct part no. Now the belt I [ 2 Answers ]

I replaced mower deck belts on two MTD riding mowers, 38" & 42" decks. Both belts I used the correct part nos. according to the owners manual. Both belts seem to be too short. The decks stay partly engaged, making the motor hard to start. Once started, the decks have to be engaged, if not engaged...

Maytag dryer, I replaced belt but in doing unhooked wires [ 1 Answers ]

How do I hook the wires back yp. I thought I had it corect but when I hit the start button it only buzzes?

Replaced belt on dryer [ 1 Answers ]

I replaced the belt on my kenmore dryer, it still won't start, what do I do now

Dryer Belt broke and belt tension pulley fell out. Where does it go? [ 1 Answers ]

When the dryer belt broke, the belt pulley fell to the bottom of the dryer. I can't find where to put it back. The dryer is 25 years old. I don't want to pay for a service call. Is there a manual on line?

View more questions Search