3 phase power to single phase

gregshireyii Posts: 1, Reputation: 1

New Member

Aug 21, 2012, 06:40 AM

3 phase power to single phase

How do I tie a single phaze pnl into a 3 phaze service

hkstroud Posts: 11,929, Reputation: 899

Home Improvement & Construction Expert

Aug 21, 2012, 06:53 AM

Where are you located and what is the circumstance that you are working with 3 phase power?

Add your answer here.

Check out some similar questions!

3 phase vs single phase power [ 2 Answers ]

I have purchased a 3 phase 10 kva DG set. When supplier came to install and commission DG set, he told that your home is of single phase supply. So the commissiong of DG set can not be done. There is loss of $10000 to me. Please advice me , what is way out. How we can use the above DG set in my...

Single phase phase separation for rotary phase converter [ 5 Answers ]

I have a 240V Roto-Phase converter (ARCO Electric model M) in my shop installed by an electrician. A wire came loose last week and while debugging that I started thinking about the way it was wired and confused myself. My understanding of 3 phase power is that each leg is 120 degrees out of phase...

3-phase vs single phase power usage [ 2 Answers ]

My currnet a/c is on 3-phase and I'm going to replace it. I want to get a 5 ton 16 SEER ($1500 gov't rebate)but they are available in only single phase. I'm wondering if it will cost significantly more to run a new 16 SEER unit on single phase than a new 13 SEER on 3-phase.

Single phase vs. 3 phase power - what makes 3 phase more efficient? [ 1 Answers ]

Hi, What is it that makes 3 phase power more efficient? Suppose I need an air compressor for a printing shop and I can choose between a 7.5HP single phase and a 7.5HP 3 phase. Ignoring that the cost of the motor is a little less for 3 phase, why is the motor more efficient and how does...

Option of 3 phase or single phase power, [ 2 Answers ]

How would one decide on which to use either 3 phase or single phase power to heat an airplane hanger?