Ask Experts Questions for FREE Help !
Ask
    xxxx1111's Avatar
    xxxx1111 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 13, 2012, 07:09 AM
    3 phase vs single phase power
    I have purchased a 3 phase 10 kva DG set. When supplier came to install and commission DG set, he told that your home is of single phase supply. So the commissiong of DG set can not be done. There is loss of $10000 to me. Please advice me , what is way out. How we can use the above DG set in my single phase residence. Pl. reply on priority basis.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Jul 13, 2012, 07:28 AM
    How did a 3 phase generator get ordered and installed to serve a single phase system?

    As the genset manufacturer stated, you can't.

    Applying a single phase load to a 3 phase generator will cause the unit to operate out of balance, so to speak.

    A longshot method would be to purchase a single phase load bank that would be connected to the un-used phase. This would get you through commissioning, and it would be needed to stay connected, so there would always be a load on the unused phase.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #3

    Jul 13, 2012, 01:06 PM
    10kW is pretty small for a 3-phase genset.

    I have to ask, who made such a mistake?
    There are ways around this, but by far the easiest thing is going to be simply get a new single phase genset. You can always sell the other one if you can't return it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Single phase phase separation for rotary phase converter [ 5 Answers ]

I have a 240V Roto-Phase converter (ARCO Electric model M) in my shop installed by an electrician. A wire came loose last week and while debugging that I started thinking about the way it was wired and confused myself. My understanding of 3 phase power is that each leg is 120 degrees out of phase...

3-phase vs single phase power usage [ 2 Answers ]

My currnet a/c is on 3-phase and I'm going to replace it. I want to get a 5 ton 16 SEER ($1500 gov't rebate)but they are available in only single phase. I'm wondering if it will cost significantly more to run a new 16 SEER unit on single phase than a new 13 SEER on 3-phase.

Single phase vs. 3 phase power - what makes 3 phase more efficient? [ 1 Answers ]

Hi, What is it that makes 3 phase power more efficient? Suppose I need an air compressor for a printing shop and I can choose between a 7.5HP single phase and a 7.5HP 3 phase. Ignoring that the cost of the motor is a little less for 3 phase, why is the motor more efficient and how does...

Can three single phase loads be driven individually by single three phase supply [ 2 Answers ]

Hi... I am new this community... You are doing great job of knowledge transfer... My question: Can three single phase loads be driven individually by single three phase supply? Please clear my doubt... :confused:

Option of 3 phase or single phase power, [ 2 Answers ]

How would one decide on which to use either 3 phase or single phase power to heat an airplane hanger?

View more questions Search