 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Waltec 12 diverter
I am trying to remove a diverter from a Waltec 12 shower fawcett. I have taken off the screw and knob and backed off the nut however the diverter will not move nor does it appear to have any other way to be removed. Is there something I am doing wrong?
|
||||
|
||||
|
This link may help, Waltec shower valve Problems & Solutions - Page 12- FixYa This is a Watec trouble shooting page, Good luck, Tom
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I am trying to remove the diverter from my waltec tub and shower system. I have replaced the cartridges for both hot and cold water in the past years as my sons tend to crank the knobs.(okay no jokes about that please.. they are boys) Well the shower knob has come off and they have been using a...
Looking for a replacement for this sure temp cartridge RB2004
I have two urinals with waltec manual flush valves that are side by side. One of them runs all the time very slowly and won't flush manually. The other flushes manually but with very low pressure. Any troublshooting advice would be helpful. Thanks
I have really old 2 handled waltec shower faucets that are dripping and I know the reason why. I have replaced the washers on the cartridges, but the seating inside the tube appears to be pitted around the perimeter so that the new washers cannot make a perfect seal. Does anyone know if that...
I am trying to fix a leaking diverter in my shower. How do I remove the old diverter? I have removed the knob, and cover. Thanks!
View more questions Search
|
