 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to repair a pull out friedrich grohe faucet handle that separated from the hose
I have a white Friedrich Grohe kitchen faucet that has a pull out sprayer handle. The handle has separated from the sprayer hose and doesn't appear to be actually broken but will not snap back together. Maybe it requires some type of epoxy or glue? Does anyone have any ideas?
|
||||
|
|
|
||||
|
It should be screwed in. There should be a cup-like female thread cup. Hose may have broken off and this up may be still attached to the handle. See if you can unscrew it. It should go by hand. Back to you. Milo
|
||||
|
|
|
||||
|
Thanks Milo,
I can see the screw on the hose and there is a white plastic type material inside the cap, I donno how to attach that white part to the screw on the hose! Thanks |
||||
|
|
|
||||
|
Can you post a clear pic of both ends - the hose and handle. It is hard to get the visual. Back to you. Milo
|
||||
|
|
| Question Tools | Search this Question |
Check out some similar questions!
The hose in my Grohe LadyLux faucet leaks at the opposite end of the hand help sprayer. I think I may need to replace it but do not know how? Any advice?
I have a white Friedrich Grohe kitchen faucet that has a pull out sprayer handle. The handle has separated from the sprayer hose and doesn't appear to be actually broken but will not snap back together. Maybe it requires some type of epoxy or glue? Does anyone have any ideas?
I recently purchased a 14 year old home. I have two Friedrich Grohe shower faucets. Both are malfunctioning. The first has very low water flow. The other has luke warm water at high hot setting. Each faucet has a plastic ring with temperature ring on it. I would like to pull the valve on...
My friedrich grohe kitchen sink faucet has a leak in the bend of the spring hose. I have unscrewed the spring hose, but I cannot pull it through the top of the faucet. I gets stuck. How do I remove it?
Need help identifying Friedrich Grohe faucet. The hand held broke and was wondering if anyone knew where I could replace it.
View more questions Search
|
