I have a white Friedrich Grohe kitchen faucet that has a pull out sprayer handle. The handle has separated from the sprayer hose and doesn't appear to be actually broken but will not snap back together. Maybe it requires some type of epoxy or glue? Does anyone have any ideas?

It should be screwed in. There should be a cup-like female thread cup. Hose may have broken off and this up may be still attached to the handle. See if you can unscrew it. It should go by hand. Back to you. Milo

Thanks Milo,
I can see the screw on the hose and there is a white plastic type material inside the cap, I donno how to attach that white part to the screw on the hose!
Thanks

Can you post a clear pic of both ends - the hose and handle. It is hard to get the visual. Back to you. Milo