Ask Experts Questions for FREE Help !
Ask
    rappdr's Avatar
    rappdr Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 12, 2012, 10:24 AM
    Kenmore ultra wash dishwasher touch pad
    Start button does not work...
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Aug 13, 2012, 12:25 PM
    Here are the manuals: https://dl.dropbox.com/u/8010163/Whi...ishwashers.zip
    Usually, you remove the rubber cover containing the buttons (turn off power, first) and clean both the circuit board and rubber with dishwashing soap or shampoo with soft toothbrush. Wipe dry and clean again with alcohol and blow dryer. Let dry well for an hour or two, re-assemble and you should be good to go. It's the same way you repair remote controls that have had something spilled on them. The touch pad probably got wet somehow. Make sure to seal it up with GE silicone caulk or you will have the same problem again.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How do you engage the lock on this dishwasher kenmore ultra wash smart wash dishwashe [ 1 Answers ]

How do you engage the lock on this dishwasher kenmore ultra wash smart wash dishwashe

My kenmore ultra wash dishwasher will not run the wash cycle, it fills then hums [ 0 Answers ]

My kenmore ultra wash dishwasher won't run the wash cycle, it fills with water then hums softly?

Kenmore elite ultra wash dishwasher quiet guard 7 with the turbo wash. [ 1 Answers ]

I have a kenmore elite ultra wash dishwasher quiet guard 7 with the turbo wash. The middle spray arm has stopped spinning. I changed the feed tube going up to the arm, but to no avail. The feeder tube assemble didn't come with the Turbo section. I checked the water level and it seems adequate and I...

Kenmore Ultra Wash Dishwasher - flashing normal wash and Cancel lights? [ 1 Answers ]

Kenmore Ultra Wash Dishwasher - flashing normal wash and Cancel lights? Is there any easy fix to the flashing lights? I have the "normal wash" and "Cancel" lights flashing. The dishwasher does not work. Model: 665.1385

Kenmore Dishwasher 665 touch pad [ 1 Answers ]

We have a Kenmore 665.16764000 dishwasher and the Quick Rinse light either remains illuminated, or it flashes. We have unplugged it overnight, tried to start the diagnostic mode on it, etc. but nothing seems to work. From what I have found here and elsewhere the likely culprits are the touch pad...

View more questions Search