 |
|
|
 |
New Member
|
|
Aug 10, 2012, 10:14 AM
|
|
How to test sewer line leak with water
The building inspector says we need to place a plug at the lower cleanout and fill the pipe from above with water to test for leaks I have the plug, is it wise to put in a plug where the toilet sits before testing
|
|
 |
Eternal Plumber
|
|
Aug 10, 2012, 10:36 AM
|
|
STOP!! Don't plug the cleanout and then fill the stacks. If you do you'll have water all over the place. Every sink, tub. Vanity, washer station and toilet will overflow.
Now I need the information you've left out. This is what we do on our 2nd, rough inspection. Is that what you have? A half built house with no fixtures installed or what? Let me in on what's going down. I need more information. Back to you, Tom
|
|
 |
New Member
|
|
Aug 11, 2012, 06:26 AM
|
|
I have a modular home that has all sinks, toilets installed already. It is a rough inspection.The home is 15 years old and just moved it from a park to our own property.
Thanks for the info!!
|
|
 |
Eternal Plumber
|
|
Aug 11, 2012, 06:39 AM
|
|
OK! I understand. Here's what you're going to hafta do. Take a count of every fixture in your house that has a trap including toilets and floor drains, Now remove the bends from the traps and measure the openings. Now go to an plumbing supply house and tell them what you have to do and ask them to tell you what size inflatable test balls you'll need to seal off the drainage. Once you seal off all openings including the house cleanout you may go on the roof and fill the stacks. Leave it set overnight and call your inspection for the next morning. Good luck, Tom
|
|
 |
Home Improvement & Construction Expert
|
|
Aug 11, 2012, 08:48 AM
|
|
I think you should talk to inspector. Ask him to tell you explicitly what he wants you do do. Better yet, talk to someone else in the office. Something doesn't sound right here.
|
|
 |
Eternal Plumber
|
|
Aug 11, 2012, 09:02 AM
|
|
Sounds right to me Harold,
The inspector's asking for a 2nd rough inspect. Sometimes called "A tub set and water pipe inspection. That's when we seal off the drainage and fill the stacks from the roof. We also pressure up the water pipes. This is done the night before the inspection so if there's any leaks they will show up the next day, This is a unit that's been disconnected and moved. Who knows what pipes were damaged or pulled apart during the move. Hence the static water test. Things a little clearer now? Regards, Tom
|
|
 |
Home Improvement & Construction Expert
|
|
Aug 11, 2012, 09:27 AM
|
|
But this is a mobile home. Doesn't sound right to do a rough in inspection on mobile home. Sounds like inspector does not know that it is mobile home or is misapplying inspection requirements.
Could just be mis-communication problem or could be weird requirements of some jurisdiction.
I'd check with another individual in inspection office just to be sure.
|
|
 |
Eternal Plumber
|
|
Aug 11, 2012, 09:37 AM
|
|
 Originally Posted by hkstroud
But this is a mobile home. Doesn't sound right to do a rough in inspection on mobile home. Sounds like inspector does not know that it is mobile home or is misapplying inspection requirements.
Could just be mis-communication problem or could be weird requirements of some jurisdiction.
I'd check with another individual in inspection office just to be sure.
And you'd be entirely correct if this was, indeed a mobile home. But it's not!
Lots of difference between a nodular and a mobile home. Everything has tom be tested before the inspector can issue a CO. Regards, Tom
|
|
 |
Home Improvement & Construction Expert
|
|
Aug 11, 2012, 09:39 AM
|
|
I stand corrected.
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Leak in main ABS sewer line
[ 4 Answers ]
Firstly, please forgive me if I get some terms wrong. I'm learning this as I go.
Recently, we had a clogged drain at our house. We purchased some drain cleaner, and overnight it seemed to work.
The next day, it started to clog again, and after a vigorous plunging, the drain cleared up.
This...
Leak @ PVC Joint just above main sewer line.
[ 1 Answers ]
Hi,
I have a leak at a PVC joint in the branch drain line coming from my kitchen sink that runs directly into the sewer line. I’ll try to explain the location of the leak. The sewer line runs with a slight slope along the top of my basement. At the approx. location of my kitchen sink (floor...
Plug in new sewer line to test for leaks
[ 2 Answers ]
We are converting from septic to sewer. We are trenching from the house to the street and having a contractor connect from the sewer lateral to a cleanout within the property line. We will then lay the line from that point to the cleanout close top the house. The building inspector says we need to...
View more questions
Search
|