 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Dear sir, I have got a new house, the electrical company put in three meters, So I have three breaker panels, they did not put in main disconnect switches, When I asked to have them installed, they told that I would have to have three Separate ones, the cost was prohibative. My question is, is...
I am trying to connect a subpanel in my garage so I can run my 71/2 hp 230v single phase air compressor. I live in a mobile home with a power pole and it has a single pole 20 amp breaker supplying the garage currently. The wire going to the garage is #10 600v copper. What type of preaker do I need...
Switch position reverse. I have 120v coming from the breaker to the switch box. The box has the in and out white wire tied together and the in and out ground wire tied together. The black wire in and out goes through a single switch. It works fine, but switch positions are reversed On is off...
I have recently replaced a lightpost in my yard which had an outlet in the center of the post. The outlet only worked if the light was on. The light was controlled by a hard wired timer which had a black, white, red and green wire. I assume the red and black juiced the outlet and the light. The...
GFCI circuitry. Technical purpose and function. Can someone please explain? Also, what is the proper way for an inspector to test a GFCI receptacle?
View more questions Search
|
