Ask Experts Questions for FREE Help !
Ask
    smearcase's Avatar
    smearcase Posts: 2,392, Reputation: 316
    Ultra Member
     
    #21

    Aug 9, 2012, 05:49 AM
    Tom and hk,

    Finally got a chance to review the A O Smith owner's manual.
    Designation on front of manual is:
    FPSH/FPCR/FPST with Smart Valve & 2" PVC Vent Capability

    Under Installation of Vent System it says in part:"Nonmetallic vent piping may be used if it has a HDT (Heat Deflection Temperature) of at least 157 degrees F. Some typical nonmetallic vent materials meeting this requirement are PVC to ASTM D2665... " (and others listed).

    The sch 40 pvc that was used shows that ASTM 2665 designation stamped on it, so it appears that the installer used one of the allowed materials. They just didn't secure it to the heater properly.

    Thanks to both of you for the information.
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #22

    Aug 9, 2012, 06:11 AM
    Please let us know what you find out. If what you have for a vent pipe is schedule #40 PCV I would have it replaced at once. Good luck, Tom
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #23

    Aug 9, 2012, 06:19 AM
    Tom
    I think Smearcase is saying the Sch 40 meets the specs of the installation instructions.
    smearcase's Avatar
    smearcase Posts: 2,392, Reputation: 316
    Ultra Member
     
    #24

    Aug 9, 2012, 07:01 AM
    Yes. That is what I got out of it.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I put in water heater, after turning it on , water comes from pressure valve. [ 2 Answers ]

Need advise on pressure valve leak in hot water heater

I have an all electric home and want to replace electric hot water heater with electr [ 2 Answers ]

We have a total electric home and want to replace the old water heater with an electric tankless whole house hot water heater. Gas is not available where we are. Is it practical?

Turning on the cold water tap causes the hot water heater to fill [ 0 Answers ]

When I run cold water in my house, or turn the washing machine on to just cold, I can hear the hot water in the tank start to refill. This happens all the time, is there a mixing valve or something that might be bad causing this?

My water heater keeps turning off. [ 6 Answers ]

I have to turn it on at least once a day. I have 3 full bathrooms.

Turning off Water Heater [ 2 Answers ]

How long can I have the water heater off and the water supply to the water heater off? I can't make repairs right away but I have a serious leak in the hot water faucet in the bathtub so I want to cut off the hot water.


View more questions Search