Ask Experts Questions for FREE Help !
Ask
    pattim's Avatar
    pattim Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 2, 2012, 05:34 PM
    Helios spa pump
    Does anyone know it there is a reset button on the pump. We shut it down to drain and clean it and it won't restart
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Aug 3, 2012, 04:27 AM
    Do you have a door safety switch?
    Verify power to the pump, panel may not be putting out.
    All Valves open(Flow)?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    Aug 3, 2012, 05:49 AM
    Check your safeties and switches with a meter to know which one is open. If you read voltage across a switch it's open when you have voltage to ground. See: https://dl.dropbox.com/u/8010163/Whi...e%20Manual.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Spa pump [ 1 Answers ]

I have an onga spa pump that hums when you turn it on but does not pump. It has an air switch. It is pretty new hardly used. Any ideas

Why my spa drain when the pump is off [ 4 Answers ]

My spa drain when my pump turns off

Coast spa only high speed on pump 2 [ 1 Answers ]

I have this problem with pump 2 not going on low speed and the fiber optic lights not working.Had this happen before and I had a hot tub tech come, from the display panel he a justed the setting and everything worked fine. The kids have messed up the setting because now I have the same problem....

Spa pump fuse [ 1 Answers ]

The PUMP 1 FUSE light is on and the pump doesn't work. The control system is a CS6230VDS from Hydro Spa. I assume I should change the fuse but I can't tell where it is. Can anyone help me?

No 240 volts to spa pump [ 5 Answers ]

Hi, I really hope someone can help with this, I recently replaced the pump on my spa, it is a 240volt 2 speed pump as was the original. It ran for about 4 hours then stopped, the time delay fuse (20a) on the circuit board had blown so I replaced that and now nothing runs except the light, and I...

View more questions Search