Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Kitchen Mixer Tap looses pressure
[ 1 Answers ]
I have a mixer tap in the kitchen. The hot tap works fine, however the cold tap has a burst of pressure then falls off after a second, If you keep turning the tap further and further on the water comes out at a high pressure. Is the problem with the washer or is it another part of the cold tap?
Bathroom mixer tap-hot water just trickling out!
[ 1 Answers ]
I have recently changed the bath and taps in my bathroom from a pair of taps to single mixer taps. Since doing this I noticed that the hot water only trickles out, the cold water is very powerful, so to fill up a nice warm bath it would take at least an hour and by then the hot water would have...
Bathroom Mixer Tap
[ 3 Answers ]
Hi There, I Was Wondering If Anyone Know's How To Fix The Bathroom Mixer Tap. When You Turn It On, ( the hot water tap on the bath ) It Only Turns A Small Amount And The Water Comes Out Ever So Slow.. It HAS Been Doing That For A While now, But Now It Is gettind Bad. Its Very Slow. Can Anyone...
Installing A Mixer Shower
[ 1 Answers ]
Iam Installing A Mixer Shower - Which Is Not Thermostatically Controlled - I Have Installed The Cold Supply To The Rising Main But The Pressure Is Too Great And The Connection Is Leaking A Bit - Can I Reduce The Pressure By Means Of A Valve. Also I Have Just Been Told That It Is Illegal To...
Mixer tap and unequal pressure problem
[ 1 Answers ]
Hello, I have removed a washbasin with separate hot and cold water taps from an ensuite bathroom in my mother-in-law's bungalow and fitted a new basin with a mixer tap. When I connected everything up and tried the tap I got hot water but no cold. However, the cold water supply pipe got warm... View more questions Search
|