Ask Experts Questions for FREE Help !
Ask
    mikeyleemac's Avatar
    mikeyleemac Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 28, 2012, 09:34 AM
    Wire an uncoded thermostat
    NEW AED Cooper V1.1 Programmable Touchscreen Digital Thermostat Honeywell TH | eBay

    Does any one know how to wire this thing?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jul 28, 2012, 10:21 AM
    This link may have the info, may have to go further into their site.
    It is a JERK thing for a company not to label their terminals, They think you will have to call their Tech/Companies.
    I find if the info is not easily available, The unmarked crap gets tossed, then someone else makes a sale. Not Identifying terminals IS Ignorant. They are not thinking about the Consumer.
    http://www.ntsupply.com/files/produc...AQTECHDATA.pdf
    mikeyleemac's Avatar
    mikeyleemac Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 28, 2012, 11:57 AM
    Quote Originally Posted by Stratmando View Post
    This link may have the info, may have to go further into their site.
    It is a JERK thing for a company not to label their terminals, They think you will have to call their Tech/Companies.
    I find if the info in not easily available, The unmarked crap gets tossed, then someone else makes a sale. Not Identifying terminals IS Ignorant. They are not thinking about the Consumer.
    http://www.ntsupply.com/files/produc...AQTECHDATA.pdf
    To make matters worse I've already purchased one. I've emailed Cooper industries pictures of this thermostat and they have not replied. I've called cooper industries and they just bounced me around there different departments.

    I think I may have at least some understanding from the info provided. If I attempt this will it damage my heat pump?
    TopTechnician's Avatar
    TopTechnician Posts: 9, Reputation: 1
    New Member
    		  
    #4

    Jul 28, 2012, 08:05 PM
    If you miswire something and the outdoor unit runs without the indoor fan, or if the electric auxiliary heat is brought on without the indoor fan, then it could damage something. Make sure your fan turns on and off before trying anything else!
    Looks like there are plenty of inexpensive thermostats on eBay... I'd get a Honeywell.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #5

    Jul 29, 2012, 06:11 AM
    TopTechnician is correct with the possibility of Heat, and no Fan and other bad combinations. I was hoping the link or diagram would have solved it, I just looked some more and still can't find your Manual.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #6

    Jul 29, 2012, 06:19 AM
    If all else, you could set thermostat to cool and do continuity testing of all the terminal combinations, then set thermostat to heat, measure all those combinations.
    You will likely at the least need to identify these wires at thermostat:

    Power wire
    Blower wire
    Compressor Unit wire
    Heat wire

    Power connects to the Blower and Compressor for cool, and Power connects to Blower and Heat for Heating.
    The manual would not only help with the wiring, but programming as well.
    Good Luck.
    grathge's Avatar
    grathge Posts: 1, Reputation: 1
    New Member
    		  
    #7

    Aug 3, 2012, 12:57 PM
    I believe these are rebranded Climatouch units. Ref. the attached wiring legend, page 9.

    http://www.ntsupply.com/files/products/Climatouch_CT07TC32ADH_IOM.pdf

    Be careful, test one connection at a time.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

2 wire heat thermostat and 2 wire air thermostat want to wire to a programmable [ 1 Answers ]

2 wire heat thermostat and 2 wire air thermostat want to wire both to a programmable thermostat, need wiring information

Hunter 44905 Thermostat ground wire connector- where do the wire go [ 0 Answers ]

Just bought hunter 44905 thermostat and the wires that goes to the old one include the ground wire.where do this wire go on my new hunter 44905 thermostat connector? Thanks

Replacing 4 wire White Rogers Thermostat with 5 Wire Thermostat [ 3 Answers ]

I have an old White-Rogers thermostat with only 4 wires coming out of the wall and need to replace it but the only new ones I find (at Home Depot) have 5 wires. How do I hook up a 5 wire thermostat to 4 wires and still have it work properly? Big John

I'm replacing an old 2 wire thermostat with a Hunter (#44155C). Wire placement? [ 3 Answers ]

I'm not sure of the wire placement. I have a black and white wire attached to my old thermostat. The new thermostat has attachments labeled G, RC, Rh, Y/O, W/B, Y1. There is a jumper connecting RC and RH. Do I connect the black wire to RH and the white wire to W/B? Any help would be greatly...

How to wire 3 wire 2 zone cooling only to Honeywell thermostat [ 10 Answers ]

I currently have two zones for cooling only and the thermostat wires are red, blue and white. The red is labeled Rc which is easy, the white is labeled W Heat (this doesn't make sense to me) and the blue is labeled cool? What I think I need to do is connect the red to the Rc on the thermostat,...

View more questions Search