 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Maytag bravos washing machine drain pump will not shut off
I have a Maytag Bravos toploader washing machine that I replaced the drain pump in about 6 months ago. Everything worked well after the pump installation for about 3 months. However, in the last few months there are occasions where the machine will start the draing cycle and the pump will not shut off. Sometimes I can get it to shut off by pressing the power button off, pressing it back on and hitting the pause/cancel button. This past weekend the only way to shut it off was to unplug the machine.
Where do I look and what do I look for? I forgot to mention, it is not throwing any codes. Thanks. |
||||
Check out some similar questions!
Maytag Performa top loading washing machine doesn't drain, but will start pumping/draining after opening the lid and closing it again. I just replaced the pump about 8 months ago. Not sure if it's the timer or a solenoid getting stuck.
My maytag insignia washing machine won't drain and the hoses are not clogged
My maytag bravos washer was toward the end of a load - 19 min left. It stayed on 19 minutes for quite some time. I then unplugged the machine and plugged it back in. It seems like it is trying to drain but will not. When I press the cancel button the motor will continue to run even though the...
I have a maytag clypso washing machine. It would not drain at all. I actually pulled it outside and pulled the hose off to get it to drain. Some cotton came out but the hose that goes in to the wall to drain was not plugged. Do you think I should hook it back up and try again? Thank you, Amy
At what pumping distance (upward) will the typical pump motor be overstressed?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
