Ask Experts Questions for FREE Help !
Ask
    bsharp8's Avatar
    bsharp8 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 19, 2012, 07:57 PM
    Goodman troubleshooting
    My light is on and I hear the relays come on but no blower. Just replaced the motor, the old one burned up.

Check out some similar questions!

Goodman furnace troubleshooting [ 0 Answers ]

Inducer motor runs after shut down in heating or cooling. Status light blinks 5 times, signaling, "false flame sense" I'm perplexed.

Goodman furnaces troubleshooting? [ 3 Answers ]

I put in the furnace and a/c myself . When I turn on the thermostat it gurgles at the furnace for a while takes like five to fifteen min to light up and blow is this the norm thanks gary!

Goodman Furnace Troubleshooting? [ 3 Answers ]

How can you tell if your heat exchanger is bad? I am getting high Co2 reading. And the flames seems to be blowing to strong, or could that be the gas valve, or dose it need adjustment in the tudes? I don't think the chinney is plugged.

Goodman furnace troubleshooting [ 3 Answers ]

Goodman 95% 2 stage furnace. LED code says pressure switch is stuck open. 1) Changed switch. 2) Jumped Limit switch. 3) Changed PCB. Same error code. 3 blinks "code says pressure switch is stuck open" Can You Guide me further

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.