Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Basement plumbing
[ 4 Answers ]
I'm planning a full bath and laundry in my basement where no plumbing exists. I've been looking at waste lines since they'll require more coordination (slab work). My assumptions for sizing is: 2" for shower 2" for washer 1 1/2" for sinks 3" for toilet Vent diameter matches waste diameter
Basement plumbing
[ 1 Answers ]
What do I need to get plumbing for a basement bathroom?
Basement Plumbing
[ 9 Answers ]
Hello, Im starting to finish my basement and have a few questions on the stubbed in plumbing. It is stubbed for a full bath and drains into an ejector pump. I marked on the photos below what I thought each pipe is for, but there is one unknown 2" pipe next to the toilet. Also, on the other...
Basement plumbing
[ 1 Answers ]
I have a basement I want to finish were the plumbing is roughed in. They have 4 drain pipes in a row. One is 3 inches, two are two inches and one is one and a half inch. I figure one is for a shower , one is for a sink one is for the toilet, but what is the one and a half inch pipe for?
New basement plumbing
[ 5 Answers ]
I am planning on putting a bathroom in the basement. My ejector pit currently services a floor drain into which runs condensate from the central air as well as water from the central humidifier. I would like to install a toilet, sink, and shower. Do these each need separate connections to the... View more questions Search
|