Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing fan motor relay switch with upgraded switch
[ 4 Answers ]
Hello, I've searched online to locate a replacement fan motor relay switch for an old Fedders propane heating unit in my greenhouse. The replacement should be fairly easy to do, however the part I was needing ( RBM 84-20103-301A) was listed as obsolete and was replaced by (McQuay part #...
Swapping Dual Light Switch for Dimmer/Three Position Switch for Ceiling Fan
[ 1 Answers ]
I am trying to swap out a dual switch for a switch that has a dimmer for the ceiling fan light and a three position switch to control the fan. The original wiring had white to white on switch, black to black on switch, and one black from light connected to the top switch pole and the other black...
I am trying to wire a switch with a harbor breeze switch to operate the fan and the s
[ 2 Answers ]
I am trying to wire a switch with a harbor breeze switch to operate the fan and the switch has 3 sets of black and white wires along with the grounding wire. How do I wire this to the fan switch which only has a grounding wire and 2 black wires?
Separate Fan light switch, fan switch and switch for can lights to one location
[ 2 Answers ]
I have A circuit that has 6 can lights and a fan light. The power is at the switch box I need to know how to wire the separate switches for the cans,and the light on the fan, and fan (That would be in a three gang switch box.) to one location.
HEAT-OFF-COOL system switch - AUTO-ON fan switch.
[ 2 Answers ]
Dear Gurus, I am a new house owner & not used to thermostats. We have Honeywell 8112D thermostat. We recently turned ON our Fan switch (in the thermostat). Now the fan is not turning off. It is continuously running even when the system is in OFF & Fan is in AUTO mode. We tried reducing the... View more questions Search
|