Ask Experts Questions for FREE Help !
Ask
    geoffrey765's Avatar
    geoffrey765 Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Jul 15, 2012, 08:56 AM
    Kenmore model 110.27711600
    I have a problem with this washer. It does not spin. Other functions OK. Tried changing the coupler and clutch assembly worked once then not again. What else could be the problem?
    joe199178's Avatar
    joe199178 Posts: 19, Reputation: 1
    New Member
    		  
    #2

    Jul 15, 2012, 01:17 PM
    Check lid switch
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    Jul 16, 2012, 09:26 AM
    What have you checked with the meter? The lid switch is a good starting point.
    geoffrey765's Avatar
    geoffrey765 Posts: 4, Reputation: 1
    New Member
    		  
    #4

    Jul 17, 2012, 08:14 AM
    Lid switch is working. Just does not spin makes a clickity clack sound while trying to spin.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #5

    Jul 17, 2012, 09:36 AM
    Sounds like you put something in wrong.
    geoffrey765's Avatar
    geoffrey765 Posts: 4, Reputation: 1
    New Member
    		  
    #6

    Jul 17, 2012, 11:48 AM
    Washer worked after I installed part. Did a load of laundry worked. Next day same problem.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #7

    Jul 17, 2012, 12:00 PM
    Look at these manuals and see if you can figure it out: https://dl.dropbox.com/u/8010163/Whi...%20washers.zip
    geoffrey765's Avatar
    geoffrey765 Posts: 4, Reputation: 1
    New Member
    		  
    #8

    Jul 19, 2012, 09:06 AM
    Quote Originally Posted by drtom4444 View Post
    Look at these manuals and see if you can figure it out: https://dl.dropbox.com/u/8010163/Whi...%20washers.zip
    Turns out a transmission fault caused the shaft on the motor connected to the coupler to wear which in turn caused the coupler to slip and not engage. Got a rebuilt transmission and a good used motor and machine is working fine thanks for your help.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #9

    Jul 19, 2012, 10:05 AM
    Glad to help.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My kenmore model 110 won't spin? [ 1 Answers ]

My Kenmore 110 is 10 years old. Today it stopped draining and will not spin. The dial simply stops moving after the rinse cycle. I can move the dial to a wash or rinse cycle and the machine will work, but once it gets to the spin cycle... nothing. Is it time for a new machine or is this fixable?

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Kenmore Elite Model 110 [ 1 Answers ]

The washing machine is not spinning, so I am attempting to replace the coupler. I am able to partially remove the front console, but I can not remove the main knob. I found instructions that say to hold the dial and turn timer knob counter clockwise, but this is not working. This should be...

View more questions Search