 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Pull chain switch
I purchased a JIN YON 3 speed 4 wire chain switch part number E70469 through All Electronics and connected the L,1,2,3 to the same positions and it does not work. All I get is one speed. Did they change the configuration of the switch. The old switch has continuity from L to each number every time you pull the chain and then off. The new one does not work that way. Sometimes there are 2 numbers on and never found a off. Can anyone explain.
|
||||
Check out some similar questions!
The wires from the fan are white, brown, purple, and gray. Which ones go where on the switch?
Hampton Bay Tahiti Breeze with light kit, Model 344 476; remote control, model UC7083T; & pull chains. Fan/light worked till last night; now fan does not work either way. Light works with chain. Checked electrical switches; okay. Tried replacing battery in remote, but no difference. Try to...
I have a celing fan with a light, i bought a new switch because fan did not work9three speed) i hooked it up but now the light works but fan does not. There are two yellow wires and one black wire and one whithe wire from the switch. There are two yellow wires and two black wires coming from fan....
:confused: I was told that I could convert any light fixture to a pull chain light by drilling a hole in the light canopy and connecting a pull chain switch. I did that and got the light to work but it will not turn off with the chain, I have no wall switch. Is this all wrong or have I connected...
I am wanting to add a pull chain mechanism to a new, hard wired type light fixture. I have purchased a ceiling fan light kit pull chain mechanism. The pull chain mech has red, blue and black wires:eek:. . The fixture has white, black and ground. . How do I wire this up?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
