[woess]

I replaced v-tec sensor, vehicle speed sensor, and starter drove 10 miles everything worked fine and then blew 100 amp fuse to fuse box. Cannot solve the problem. Keep blowing fuse.

[tkrussell]

Moved from Electrical to Cars & Trucks

[TxGreaseMonkey]

You have a major problem in the Power Distribution Circuit:

. Check the ignition switch for wear, pitting, or melting, after disconnecting the negative battery cable.

. Remove and check the alternator. This is the most likely cause of the problem.

. Remove and test the starter, if the problem persists. There may be a short in the solenoid or starter motor. Check all connections. Check the cable running from the positive battery cable to the starter motor. Look for breaks in the insulation and hidden deterioration.

[tkrussell]

Thanks Tex.

I am a regular Sgt Shultz here when it comes to vehicle electrical, "I know Nothing!!"

[Stratmando]

I would check Alternator as well as Starter Connections.
Try with wiring disconnected from Alternator, then Starter.